UNIWRAP 300 AVDB
Automatic wrapping machine with arm rotation
High Speed Configuration with Double Arm performing stretch wrapping by arm rotation
Durable
Made to last and to minimize the impact of maintenance
Efficient
Crafted to maximize cost effectiveness and minimize the impact on the enviroment
Production
104 pal/h
Leggi di più
Pallet dimension 1.200 mm x 800 mm x height 1,600 mm , with 6 wrapping turns, 500 mm fim height, conveyor speed 15 mt / min, stable load
- Dispositivi consigliati
- Electronic powered pre-stretch with duble motors
mod. PE/2RM (film height mm. 500) with adjustable ratio directly from the control panel and adjustable tension of the stretch film on the corner of the load
- Pneumatic device installed on the pre-stretch
dispensing arm to adjust stretch film tension on the load during the wrapping cycle; all possible settings of the wished pressure are activated by proportional valve controlled by PLC
- Electropneumatic welding unit by contra-plate
no contact with the load
- Modem for remote assistance via Internet
with safe VPN internet connection
- Opzioni aggiuntive
- Pneumatic / mechanical top pressor
for light or unstable products
- Electronic powered pre-stretch unit with fix ratio
mod. PE/1RMI (film height mm. 500) and adjustable tension of the stretch film on the corner of the load (max. pre-stretch value 260%)
- Electropneumatic welding unit with integrated cutt
directly on the palletised load
- Hydraulic lifter
for the complete wrapping of the wooden pallet installed under the powered rolls conveyor
- Device to reduce stretch film height
in order to create a “pre-stretched rope” and apply it on the layers of the load as an horizontal strap or directly on the pallet wood to secure load on it; the system will be controlled by PLC and may be excluded directly from operating panel
- Device to cut stretch film width into 3 stripes
and wrap the pallet in order to create an “anti-condensation packaging”; the system is controlled by PLC and may be excluded directly from operating panel
- Weighing system to be installed under conveyor
Nr. 4 weighting cells with supporting plates
Nr. 1 net device between the 4 weighting cells
Nr. 1 electronic display to show weighting data (without data transmission)
Nr. 1 push-button for pallet exit / confirmation that data have been read P39"
Build the way you need! literally
Designed to meet the needs of each customer (possible line example)